The double-sided tape helps fixating folia supported papers (see our tear-proof Japanes papers).

Natural Japanese Paper can be fixated by either tape or glue.

When glue was used the paper can be more easily removed again after it had been wettened a bit for a while, e.g. for exchange or renewing it. Both agents should be applied to both the frame and the bars.

 

We import castors directly from Japan. They are designed for the special usage with Shoji and Fusuma sliding doors. The sliding rails are manufactured on demand in our own workshop.

Shoji glue, 150 ml bottle

Item No. 11.01.01
1 bottle / 150 ml
for appr. 35 mtr line
  • ready-to-use glue made from starch for fixation of Natural Paper
  • special bottle allows direct application without brush even onto smallest bars

Tape double-sided, 38 mrt x 5 mm

Item No. 11.02.01
total length: 38 mtr
width: 5 mm
  • for fixation of folia supported paper
  • 1 box contains 2 rolls each 19 mtr, total = 38 mtr
  • thickness: 0,21 mm
  • colour: transparent (even if it looks white on the picture)
  • material: polyester / acrylat adhesive

This special tape from Japan was developped by a manufacturer of sliding doors. In case of exchanging the paper, it can be easily removed from the raw shoji timber bars.

Double-sided tape, roll 50 mtr

double-sided tape for fixating Japanese Paper onto shoji bars
Item No. 11.02.
1 roll of 50 mtr
width: 6, 9 or 12 mm
  • for fixation of folia supported paper or other materials e.g. metal, cloth, normal paper
  • thickness: 0,205 mm
  • glue: modified resolvent acrylatglue
  • supporting material: PET folia 0,012 mm
  • colour: transparent (even if it looks white on the picture)
  • ageing-resistant

This tape provides instant strong and clean adhesion.

Shoji rolls / castors, v-profile, 1 pair

Shoji rolls /castors, V-profile
Item No. 11.10.01
86 x 14 mm
1 pair
  • load capacity for each pair: 20 or 40 kg
  • housing: yellowish chromated
  • dimensions frontplate: 86 x 14 mm
  • thickness frontplate: 3 mm
  • mortise depth: 30 mm
  • profile: v-shaped

For setting in any kind of sliding doors. The rolls can be adjusted in height up to 6 mm.

Shoji rolls / castors, flat profile, 1 pair

Shoji rolls /castors, flat
Item No. 11.11.01
86 x 14 mm
1 pair
  • load capacity for each pair: 20 or 40 kg
  • housing: yellowish chromated
  • dimensions frontplate: 86 x 14 mm
  • thickness frontplate: 3 mm
  • mortise depth: 30 mm
  • profile: flat
  • wheel width: 8 mm

For setting in any kind of sliding doors. The rolls can be adjusted in height up to 6 mm.

Sliding rail for Shoji, maple, v-profile

Item No. 10.20.01
9,5 x 9,0 mm
prices: running metres
  • timber: maple
  • for v-profile wheels
  • for setting in
  • available in various kinds of wood (just ask us)
  • width: 9,5 mm
  • height: 9,0 mm
  • prices: running metres

Matching the v-profiled castors we offer these rails for setting into the floor. They are made from hard timber and are merely cut, not cleaned or grounded.
We can provide rails up to 4,50 mtr depending on the available timber. Please note that 1,70 mtr lengths and up have to send via freight shipping (please ask us regarding extra costs)
Please tell us which lengths you need (e.g. 3 x 1 mtr).

Sliding rail for Shoji, beech, v-profile

Item No. 10.21.01
9,5 x 9,0 mm
prices: running metres
  • timber: beech
  • for v-profile wheels
  • for setting in
  • available in various kinds of wood (just ask us)
  • width: 9,5 mm
  • height: 9,0 mm
  • prices: running metres

Matching the v-profiled castors we offer these rails for setting into the floor. They are made from hard timber and are merely cut, not cleaned or grounded.
We can provide rails up to 4,50 mtr depending on the available timber. Please note that 1,70 mtr lengths and up have to send via freight shipping (please ask us regarding extra costs).
Please tell us which lengths you need (e.g. 3 x 1 mtr).